Before the holidays I did a wearable muslin of the Marilla Walker Isca shirtdress. I had very high hopes—the reviews were good, the diagonal bodice line had me dreaming of stripey wonders, and, of course, pockets!

I made it up in some nice brushed blue/black check shirting (no idea where this fabric came from, I feel like I’ve had it forever). The directions were excellent, especially given the unusual shoulder construction, and the fit was pretty good. The only alteration I made was to change the pointed collar to a rounded one.

The only problem was the pockets were too shallow. I kept losing things out of them when I sat down. Now, I don’t have very many requirements for pockets, but one hard and fast rule I do have is that things need to stay in them until I take them out.

Obviously I could just fix it in round two, but I really didn’t want to give up on the muslin, which had turned out more on the ‘wearable’ side than the ‘muslin’ side. But I didn’t have enough fabric to recut the front skirt (nor did I have enough ‘want to do it’ to recut the front skirt).

I did, however, have enough fabric to cut a few bias bands and enough ‘want to do it’ to undo just enough of the waist and side seams to shove them in:

The inner piping is where the original pocket edge ended; I sewed the new strip to the pocket edge (sewing in the ditch of the piping), then attached piping to the raw edge of the new strip. I used a strip of black hem facing tape to finish the inside of the bias strip (because I didn’t have enough of the check fabric to do so).

Here’s a closer view (the inner piping is fatter than the outer piping because, uh, things that are closer look bigger and also because I ran out of that size of piping cord):

And one with an iPad mini in it, for scale:

I also shortened the skirt by about three inches (did I unpick the original foldover hem and then redo it? Ha, no, I just folded it up and sewed it down, as my reserves of ‘want to do it’ were running quite low at this point).

The only other thing I wish I had enough fabric to change are the sleeves: I feel like that diagonal line of the bodice would be really cool if it extended to a little cap sleeve. I looked at a bunch of “draft a cap sleeve” instructions but … not enough fabric, and even my spiffy new LIGHT UP SEAM RIPPER didn’t inspire me to take off these (perfectly serviceable) set-in sleeves and see if I could recut them into caps.

I have some (lol “some” I have ENORMOUS QUANTITIES) of stripey fabric that I think will be good for the next round. There are a couple more projects in the queue before I will get there, but in the meantime, I can now wear this one!